Creation Group

End-to-end solutions for the cold-forming industry

From raw materials and cold-heading wire to tooling, heat treatment, surface treatment and failure analysis, we provide coordinated technical service around the final part and production stability.

Discuss project requirements ↗

MATERIAL · TOOLING · HEAT TREATMENT · SURFACE · FAILURE ANALYSIS

WHO WE ARE

More than cold-heading materials: connecting the critical manufacturing steps

Creation Group provides an end-to-end solution for the cold-forming industry, from raw-material selection and cold-heading material supply to tooling, heat treatment, surface treatment and failure analysis.

Our role is not to replace the customer's manufacturing decisions. We connect materials, tooling, processes, testing and root-cause analysis in one technical chain to reduce information gaps and improve forming and series-production stability.

CREATION GROUP / GROUP COMPOSITION

Group composition

Operations and technical service, manufacturing and quality assurance, new-material research and international business coordination work together to support cold-forming material projects.

Shanghai headquarters renovation rendering — Headquarters renovation rendering

01 · SHANGHAI

Shanghai Creation Group Co., Ltd.

Operations and technical service

Provides material selection, customer technical communication, project coordination and service support for cold-forming projects.

02 · WUHU

Creation Group Metal Sản phẩm (Wuhu) Co., Ltd.

Manufacturing and quality-assurance base

Coordinates manufacturing, testing, quality control and delivery for cold-heading wire, shaped wire and related cold-forming vật liệu.

03 · SHANGHAI R&D

Ruimin (Shanghai) New Materials Research Center

New-material and process research

Supports special grades, material-property windows and cold-forming project development through new-material and process research.

04 · HONG KONG

Creation Group International Limited

International business and customer coordination

Supports overseas commercial liaison and project coordination with the Shanghai operating team and Wuhu manufacturing base.

END-TO-END SOLUTION

A five-stage technical chain from materials to failure analysis

Each project starts with the final part, service conditions and production targets, then works backward to define the material, tooling, process, surface and validation plan.

01MATERIAL

Cold-heading materials

Match wire rod, cold-heading wire, shaped wire, shaped tube and delivery condition to the part, deformation and performance requirements.

Cold-heading tooling

Assess tooling material, design, service life and lubrication jointly with forming stages, loads and failure location.

Heat treatment

Confirm microstructure, hardness, decarburization and batch stability around spheroidizing annealing, quench-and-temper processing and the final performance window.

Surface treatment

Coordinate pickling and phosphating, lubrication, coatings and corrosion-protection requirements so the surface system matches cold forming and the service environment.

Failure analysis

Identify root causes of cracking, wear and performance anomalies through fracture evidence, metallography, hardness, chemistry, dimensions and process records.

Explore related capabilities →

0120⁺

Core team industry experience

020.40–46 mm

Wire-diameter range

03IATF 16949

Automotive quality management system

04100^%

Traceable production orders

MANUFACTURING BASE

End-to-end control from wire rod to cold-forming material

Our manufacturing system covers incoming-material verification, pickling and phosphating, spheroidizing annealing, drawing, profile forming, inspection, packaging and delivery. Key process and quality data are recorded for order-level retrieval and traceability.

01Heat-number and mill-certificate verification
02Microstructure, hardness, dimensional and surface control
03Cold-forming performance validation and final release

View processes and operation videos →

CUSTOM DEVELOPMENT

From special grades to near-net-shape materials

Working backward from the final part, cold-heading deformation, strength-ductility window, cross-sectional geometry and downstream processes, we coordinate mills, tooling specialists and customers through trials, material and process validation, and production release.

01 · SPECIAL MATERIALS

Special materials and custom grade development

When standard grades cannot meet a part's requirements, we work with steel mills to define chemistry, melting route and delivery condition, then validate an import-substitution or application-specific material through small-batch trials.

Project materials include 41CrS4, 10B38, 16MnCr5, 10B21M and 34CrNiMo6. Some special projects may start with an approximately 200 kg trial, subject to mill scheduling and the agreed technical specification.

02 · MECHANICAL PROPERTIES

Custom mechanical-property windows

Beyond grade-based supply, we define project-specific windows for diameter, tensile strength, elongation, within-coil variation and batch-to-batch consistency around the final part.

Past projects include SWCH10A 6.30 mm, full-coil property control for C4C, and 10B21 1.92 mm high-strength wire. Values shown online illustrate development capability only; order requirements are governed by the technical specification.

03 · STRENGTH & FORMABILITY

High strength with large-deformation formability

Chemistry, spheroidizing annealing, drawing reduction and delivery condition are coordinated to develop materials that combine high strength with complex multi-stage cold-heading formability.

10B21 and SCM435 projects are validated with actual multi-stage headed samples, cold-upsetting tests, metallography and mechanical properties, rather than treating any single index as a substitute for forming results.

04 · MATERIAL & TOOLING

Material and tooling development for shaped cold-headed parts

We work backward from the final part to define material cross-section, grain flow, forming stages and die loading, jointly developing shaped preform materials and cold-heading tooling.

For complex parts such as seat-belt locking blocks, the approach can reduce machining, powder-metallurgy or repeated sizing steps. Performance and cost improvements are verified for each project.

05 · CUSTOM PROFILES

Custom-profile material development

We develop non-round sections, complex profiles and near-net-shape materials for seat-belt locking blocks, bearing cages, transmission parts and precision structural components.

Critical dimensions, tolerances, radii, surface quality and production consistency are controlled to the customer drawing, with sample validation matched to the downstream forming route.

Ultra-thin-wall tube material and process development sample

Ultra-thin-wall tube material and process development measurement record 1

06 · ULTRA-THIN-WALL TUBE

Ultra-thin-wall tube material and process development

For small ultra-thin-wall tubes, we coordinate material ductility, wall-thickness uniformity, roundness, surface condition and cut-end deformation with the drawing or forming route, tooling and inspection plan.

The photographed samples record caliper readings of 0.53 mm and 0.27 mm. Final dimensional definitions, tolerances and measurement methods are governed by the drawing, calibrated instruments and the technical specification.

These examples demonstrate development and project capability; they are not standard supply commitments for every grade or value. Final material, dimensions, properties, trial quantity and acceptance method are governed by the mutually approved drawing, applicable standard and technical specification.

OUR CAPABILITIES

Materials, process and problem-solving capabilities

Connect manufacturing data, laboratory validation and project experience to support development, production and problem solving for cold-formed parts.

Spheroidizing annealing for cold-forming materials

01 · MATERIAL & TOOLING

Material and tooling coordination

Evaluate the manufacturing window from grade, delivery condition and surface condition together with forming stages and die loading.

View material systems →

02 · PROCESS

Heat treatment and surface treatment

Coordinate material pretreatment and downstream part processing around microstructure, hardness, ductility, lubrication and corrosion-protection requirements.

View process capabilities →

03 · VALIDATION

Testing and failure analysis

Use metallography, hardness, chemistry, mechanical properties, dimensions, surface condition and fracture evidence for validation and root-cause analysis.

View testing capabilities →

LABORATORY

Give every batch a basis for validation

The Shanghai office and Wuhu factory laboratories provide metallographic sample preparation, microscopy and hardness testing to verify microstructure, heat-treatment results and mechanical properties.

Shanghai laboratory · Sample preparation

Shanghai laboratory · Metallographic analysis

Wuhu factory laboratory · Testing equipment

CERTIFICATIONS

Quality, environmental and occupational health and safety system certificates

IATF 16949: 2024-07-08 — 2027-07-07 · ISO 14001 / ISO 45001: 2025-01-22 — 2028-01-04

01IATF 16949

Automotive quality management system

2024-07-08 — 2027-07-07

View certificate PDF ↗02ISO 14001

Environmental management system

2025-01-22 — 2028-01-04

View certificate PDF ↗03ISO 45001

Occupational health and safety management system

2025-01-22 — 2028-01-04

View certificate PDF ↗

RESPONSIBLE GROWTH

Long-term commitment, applied at every stage

Sustainability

Continuously reduce energy, water, acid and natural-gas consumption while advancing environmental management.

Learn more ↗ 02

Safety first

Standardize production and equipment operation under the occupational health and safety management system.

Learn more ↗ 03

Refined operations

Key process, equipment and quality data are managed online to support full-process traceability.

Learn more ↗

Need a cold-forming solution from material selection to part validation?

Submit part and process requirements →

Chứng chỉ của công ty

Shanghai Creation Group Co., Ltd.

Doanh nghiệp công nghệ cao Thượng Hải

GR202331004128 · 2023-12-12

Xem chứng nhận ↗

Doanh nghiệp nhỏ và vừa chuyên môn hóa, sáng tạo Thượng Hải

2024.03–2027.02

Xem chứng nhận ↗

Doanh nghiệp nhỏ và vừa sáng tạo Thượng Hải

2024.03–2027.03

Xem chứng nhận ↗

IATF 16949: cơ sở sản xuất tại Vũ Hồ và địa điểm hỗ trợ từ xa tại Thượng Hải

Chứng chỉ 0529958 bao gồm hoạt động sản xuất dây kim loại kéo rút tại Vũ Hồ. Phụ lục của chứng chỉ xác định Shanghai Creation Group Co., Ltd. là địa điểm hỗ trợ từ xa dành cho dịch vụ sau bán hàng, thẩm định hợp đồng, dịch vụ khách hàng, marketing và bán hàng. Chứng chỉ và phụ lục phải được sử dụng đồng thời.

Xem chứng nhận ↗ · IATF 16949 / 2027-07-07