← Back to the 11 process videos

United States · ASTM: Cold heading wire: processes and delivery conditions

Read process sequences and delivery conditions by standard system. Confirm grade, product form, edition and acceptance requirements together.

United States · ASTM

ASTM F2282-23 §3.1.10, §3.1.10.1/.2, §5.5.1

DFAR/DFAB are drawn from annealed rod/bar; DFSR/DFSB use spheroidize-annealed feedstock. SAFS is spheroidized after final drawing. AIP and SAIP are annealed or spheroidized before final light drawing. Cleaning and coating are separate operations. CHQ, AK and FG describe cold-heading quality, aluminium killing and fine grain, rather than a heat-treatment route.

DD
Wire rodCold drawing
ASTM F2282-23
DFAR / DFAB
Annealed rod / barCold drawing
ASTM F2282-23
DFSR / DFSB
Spheroidize-annealed rod / barCold drawing
ASTM F2282-23
SAFS
Drawing to finished sizeSpheroidize annealing
ASTM F2282-23
AIP
Cold drawingAnnealingCleaning and coatingLight drawing / skin passing
ASTM F2282-23
SAIP
Cold drawingSpheroidize annealingCleaning and coatingLight drawing / skin passing
ASTM F2282-23

Specify the steel grade and standard edition, finished dimensions and tolerances, surface or coating, mechanical properties, spheroidization and decarburization requirements, inspection documents and heat traceability. Similar codes do not establish material interchangeability. Creation Group processes and supplies cold-heading wire; subsequent part forming and heat treatment are qualified for the customer's process requirements.

Standards and editions

WhatsApp Technical enquiry →
Image and content use · Creation Group