PROFILE DEVELOPMENT / 22A
22A 6X11
22A 6X11: Rectangular sample record. Material designation for this case is 22A; catalog dimensions are 6 × 11 mm. The cross-section is classified as rectangular; corner and edge condition must still be verified per drawing.
Geometric Focus Points
Width and thickness dimensions, fillet radius, and edge shape
Uniformity of width and thickness, corner shapes, and straightness
Confirm technical requirements based on the drawing
Cross-sectional features and review points
This case is identified as material grade 22A, with catalog dimensions 6 × 11 mm. The cross-section is categorized as rectangular; corner and edge conditions must still be verified per the approved drawing.
Drawings and measurement requirements
During review, clearly specify orientation, tolerance, fillet, and measurement datum for 6 and 11, distinguishing cross-sectional dimensional requirements from longitudinal straightness and twist requirements.
Delivery and subsequent processing
Recommend specifying downstream clamping, feeding, or forming processes, plus coil vs. straight form, surface, and packaging requirements—delivery condition cannot be determined from material designation alone.
Documentation basis and scope of confirmation
Data originates from this case’s catalog and internal sample photographs; catalog dimensions are nominal values, and photographs do not substitute formal inspection reports. Material standards, mechanical properties, heat treatment, supply conditions, and acceptance criteria must be confirmed per project.
Photo recording
Development Q&A
What known information does 22A 6 × 11 represent?
It indicates the material designation and nominal cross-sectional dimensions listed in this case’s catalog; it does not concurrently specify applicable standards, dimensional tolerances, performance requirements, or delivery condition.
Is torsion of rectangular wire considered part of width/thickness dimensions?
Twist is a longitudinal requirement and must be measured, benchmarked, and accepted separately from width-thickness dimensions.
Related cross-sectional cases
Material data and technical communication
Technical requirements must include cross-sectional drawing and revision, critical tolerances, subsequent processing steps, delivery form, and inspection requirements.
View material selection documentation Submit technical requirements ↗