PROFILE DEVELOPMENT / 10A
10A square
10A Square: Square sample record. For square cross-sections, in addition to side length, corner geometry (e.g., fillet or other transition) and perpendicularity between adjacent sides must be explicitly defined. Sample photographs serve only for shape identification and cannot substitute dimensional records.
Geometric Focus Points
Side length, fillet radius, and perpendicularity between adjacent sides
Consistency of side lengths, corner shapes, and torsion
Confirm technical requirements based on the drawing
Cross-sectional features and review points
For square cross-sections, in addition to side length, corner geometry (e.g., fillet or other transition) and perpendicularity between adjacent sides must be explicitly defined. Sample photographs serve only for shape identification and cannot substitute dimensional records.
Drawings and measurement requirements
During drawing review, list both directional side lengths, corner requirements, and measurement direction simultaneously; if subsequent clamping relies on planar surfaces, specify clamping faces and their relationship to cross-sectional orientation.
Delivery and subsequent processing
Customer-provided drawings shall specify coil or straight-bar form, straightening and twist requirements, and subsequent cutting or forming conditions to jointly review delivery status.
Documentation basis and scope of confirmation
Data originates from this case’s catalog and internal sample photographs; catalog dimensions are nominal values, and photographs do not substitute formal inspection reports. Material standards, mechanical properties, heat treatment, supply conditions, and acceptance criteria must be confirmed per project.
Photo recording
Development Q&A
Is specifying only side length sufficient for square wire?
Corner geometry, adjacency relationships between adjacent edges, and acceptance datum must also be specified; straightness or twist requirements must likewise be listed in technical specifications.
How are side lengths in both directions communicated?
Nominal dimensions and tolerances must be specified separately for both directions; do not assume identical dimensions in both directions based on photograph appearance.
Related cross-sectional cases
Material data and technical communication
Technical requirements must include cross-sectional drawing and revision, critical tolerances, subsequent processing steps, delivery form, and inspection requirements.
View material selection documentation Submit technical requirements ↗