Nguồn thành phần hóa học và phạm vi áp dụng
Thành phần tham khảo theo phiên bản tiêu chuẩn được nêu, không phải kết quả đo thực tế của mẻ luyện. Tiêu chuẩn đơn hàng và yêu cầu riêng cho nguyên liệu, thành phẩm cần được xác nhận riêng.
Mác vật liệu · Nguồn (89)
| Mác vật liệu | Nguồn |
|---|---|
| AISI 1008 | ASTM A29/A29M-2023 / SAE J403-2014 / SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN / AGT2282 Carbon & Alloy Steel Specification / ASTM A1040-17(2022) |
| SWRM 8 | JIS G 3505:2017 / JIS G 3505:2004 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN |
| AISI 1010 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 / SAE J403 NOV2001 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN / AGT2282 Carbon & Alloy Steel Specification / ASTM A1040-17(2022) |
| SWRM 10 | JIS G 3505:2017 / JIS G 3505:2004 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN |
| AISI 1040 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 / SAE J403 NOV2001 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A1040-17(2022) |
| SWRH 42A | JIS G 3506:2024 / JIS G 3506:2004 / JIS G 3506—1996 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| 1045 | ASTM A29/A29M-2012 / SAE J403-2014 / SAE J403 NOV2001 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / AGT2282 Carbon & Alloy Steel Specification / ASTM A29/A29M-2023 / ASTM A1040-17(2022) |
| SWRH 47A | JIS G 3506:2024 / JIS G 3506:2004 / JIS G 3506—1996 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| SWRH 57A | JIS G 3506:2024 / JIS G 3506:2004 / JIS G 3506—1996 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| SWRH 62A | JIS G 3506:2024 / JIS G 3506:2004 / JIS G 3506—1996 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| SWRH 77B | JIS G 3506:2024 / JIS G 3506:2004 / JIS G 3506—1996 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| SWRH 82A | JIS G 3506:2024 / JIS G 3506:2004 / JIS G 3506—1996 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| AISI 12L14 | SAE J403-2014 / SAE J403 NOV2001 / ASTM A29/A29M-2012 / ASTM A29/A29M-2023 |
| SUM24L | JIS G 4804:2008 |
| AISI 1144 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / Wire Rods and Bars Specification Tables / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| SUM43 | JIS G 4804:2008 / WIRE ROD / Nippon Steel Wire Rods |
| SAE 4118 | SAE J404-2000 / SAE J404-2009 / ASTM A29/A29M-2012 / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 |
| SCM415 | JIS G 4053:2008 / JIS G 4053-2008 / JIS G 4105-1979 / Q/BQB 517—2023 / Q/320582 SGY503-2024 1 / Q/ZNGF 01.7—2023 / Nippon Steel Wire Rods / Bars & Wire Rods / JIS G 4053:2023 |
| SAE 4135 | SAE J404-2000 / SAE J404-2009 / ASTM A29/A29M-2012 / Nippon Steel Wire Rods / Bars & Wire Rods / AGT2282 Carbon & Alloy Steel Specification / ASTM A29/A29M-2023 / ASTM A1040-17(2022) |
| SCM435 | JIS G 4053-2008 / JIS G 4105-1979 / Q/BQB 517—2023 / Q/320582 SGY503-2024 1 / Q/ZNGF 01.7—2023 / Q/XG 231-2023 / Nippon Steel Wire Rods / Bars & Wire Rods / JIS G 4053:2023 |
| 42CrMo4 | DIN 17200-1987-03 / ISO 4954:2018 / EN 10269-2013 / ISO 4954-1-2024 / EN 10263-4-2017 / DIN EN 10263-4-2002 / EN 10263-4-2001 / NF EN 10269-1999 / DIN EN 10083-3-2007 / EN 10083-3-2006 / NF EN 10269:1999 / EN ISO 683-2-2018 / ISO 683-2-2016 / EN 10250-3-1999 / EN 10132-3:2000 / Q/BQB 517—2023 / Q/ZNGF 01.7—2023 / BEXG 021-2020 / Ovako Product Catalog / DIN EN 10277:2018-09 |
| 4140 | SAE J404-2009 / ASTM A29/A29M-2012 / SAE J404-2000 / Q/ZNGF 01.7—2023 / Nippon Steel Wire Rods / Bars & Wire Rods / AGT2282 Carbon & Alloy Steel Specification / ASTM A29/A29M-2023 / ASTM A1040-17(2022) |
| SCM440 | JIS G 4053-2008 / JIS G 4105-1979 / Q/BQB 517—2023 / Q/320582 SGY503-2024 1 / Q/ZNGF 01.7—2023 / Q/XG 231-2023 / Nippon Steel Wire Rods / Bars & Wire Rods / JIS G 4053:2023 |
| 20NiCrMo2-2 | ZOLLERN · Materials steel profiles · 1.6523 |
| 8620 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 / SAE J404-2009 / SAE J404-2000 / Nippon Steel Wire Rods / Bars & Wire Rods / AGT2282 Carbon & Alloy Steel Specification |
| SNCM220 | JIS G 4053-2008 / Nippon Steel Wire Rods / Bars & Wire Rods / JIS G 4053:2023 |
| 51CrV4 | DIN EN 10089-2003 / DIN EN 10132-4-2000(+AC:2002) / EN 10083-3-2006 / BS EN 10089:2002 (EN 10089:2002) / EN 10250-3-1999 / EN ISO 683-2-2018 / ISO 683-2-2016 / DIN EN 10083-3-2007 / ISO 683-6:2023 / BS ISO 683-6:2023 / DIN EN 10277:2018-09 |
| SAE 6150 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 / SAE J404-2009 / SAE J404-2000 / Nippon Steel Wire Rods / Bars & Wire Rods / AGT2282 Carbon & Alloy Steel Specification |
| SUP10 | Nippon Steel Wire Rods / Bars & Wire Rods |
| SAE 9254 | SAE J404-2009 / ASTM A29/A29M-2012 / SAE J404-2000 / Nippon Steel Wire Rods / ASTM A29/A29M-2023 |
| SUP12 | WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| 100Cr6 | ISO 683-17-2014 / Ovako Product Catalog / DIN EN ISO 683-17:2015-02 |
| SAE 52100 | SAE J404-2009 / ASTM A29/A29M-2012 / AGT2282 Carbon & Alloy Steel Specification / ASTM A29/A29M-2023 |
| SUJ2 | JIS G 4805:2008 / Nippon Steel Wire Rods / Bars & Wire Rods |
| S235JR | EN 10025-2-2019 / Ovako Product Catalog |
| 1015 | ASTM A29/A29M-2012 / SAE J403-2014 / SAE J403 NOV2001 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN / ASTM A29/A29M-2023 / ASTM A1040-17(2022) |
| SS330 | JIS G 3101:2024 / Q/BQB 130—2003 / JIS G 3101:2010 / Bars & Wire Rods |
| S355J2 | EN 10025-2-2019 / Ovako Product Catalog |
| A738 | ASTM A738/A738M-07 · Table 1 |
| E295 | EN 10025-2-2019 |
| SS490 | JIS G 3101:2010 · Table 2 |
| E335 | EN 10025-2-2019 |
| SM570 | JIS G 3106:2020 |
| 11SMn30 | EN ISO 683-4:2018 / EN 10087:1998 / Ovako Product Catalog / DIN EN 10277:2018-09 |
| 1213 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| 1215 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / Wire Rods and Bars Specification Tables / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| SUM22 | JIS G 4804:2008 / WIRE ROD / Nippon Steel Wire Rods |
| 11SMnPb30 | EN ISO 683-4:2018 / EN 10087:1998 / DIN EN 10277:2018-09 |
| 12L13 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 |
| SUM22L | JIS G 4804:2008 |
| 35S20 | EN ISO 683-4:2018 / EN 10087:1998 / DIN EN 10277:2018-09 |
| 1140 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| 46S20 | EN ISO 683-4:2018 / EN 10087:1998 / DIN EN 10277:2018-09 |
| 1146 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| C45 | DIN 17200-1987-03 / Ovako Product Catalog / DIN EN 10277:2018-09 |
| 1043 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 / SAE J403-2014 / SAE J403 NOV2001 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A1040-17(2022) |
| S45CM | JIS G 3311:2016 · Table 2 |
| S45C | JIS G 4051-2023 / JIS G 4051-2005 / JIS G 4051-2016 / Q/BQB 517—2023 / BEXG 021-2020 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| C60 | DIN 17200-1987-03 / Ovako Product Catalog / DIN EN 10277:2018-09 |
| 1060 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| S60CM | JIS G 3311:2016 · Table 2 |
| S60C | JIS G 4051-2023 / JIS G 4051-2016 |
| 25CrMo4 | BS EN 10263-4:2017 / ISO 4954:2018 / EN 10263-4-2017 / DIN EN 10263-4-2002 / DIN EN 10083-3-2007 / EN 10269-2013 / DIN 17200-1987-03 / NF EN 10269:1999 / EN 10250-3-1999 / EN 10132-3:2000 / EN ISO 683-2-2018 / ISO 683-2-2016 / DIN EN 10277:2018-09 |
| 4130 | SAE J404-2009 / ASTM A29/A29M-2012 / SAE J404-2000 / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 |
| SCM430 | JIS G 4053:2008 / JIS G 4053-2008 / JIS G 4105-1979 / Q/BQB 517—2023 / Nippon Steel Wire Rods / Bars & Wire Rods / JIS G 4053:2023 |
| 58CrMoV4 | ZOLLERN · Materials steel profiles · 1.7792 |
| E52100 | SAE J404-2009 / ASTM A29/A29M-2012 / SAE J404-2000 / ASTM A29/A29M-2023 |
| C53G | ZOLLERN · Materials steel profiles · 1.1213 / DIN 17212:1972-08 · Tables 1 and 4 |
| 1050 | SAE J403-2014 / SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 / ASTM A1040-17(2022) |
| 1055 | ASTM A29/A29M-2012 / ASTM A29/A29M-2023 / SAE J403 NOV2001 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A1040-17(2022) |
| S50CM | JIS G 3311:2016 · Table 2 |
| S50C | JIS G 4051-2023 / JIS G 4051-2005 / JIS G 4051-2016 / Q/BQB 517—2023 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods |
| 90MnCrV8 | ISO 4957-2018 / BS EN ISO 4957:2018 |
| A681 | ASTM A681-08 (2022) · Table 1 |
| 60Cr3 | DIN EN 10089-2003 / ISO 683-6:2023 / BS ISO 683-6:2023 / Ovako Product Catalog |
| 6145 | SAE J1249:JUN2000 · Table 1 |
| C15 | Q/BQB 130—2003 / Ovako Product Catalog |
| 1017 | SAE J403 NOV2001 / ASTM A29/A29M-2012 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN / ASTM A29/A29M-2023 / SAE J403-2014 / ASTM A1040-17(2022) |
| S15C | JIS G 4051-2023 / JIS G 4051-2005 / JIS G 4051-2016 / Q/BQB 517—2023 / WIRE ROD / Nippon Steel Wire Rods / Bars & Wire Rods / FHSProductManual_WireRod_EN |
| 16MnCr5 | ISO 4954:2018 / DIN EN 10263-3-2002 / ISO 4954-1-2024 / DIN EN 10084-2008 / EN 10084-2008 / EN 10277-2018 / EN 10263-3-2001 / ISO 683-18-1996 / EN 10132-2:2000 / Q/BQB 517—2023 / DIN EN 10263-3:2018-02 / Q/XG 243-2019 / BEXG 021-2020 / Ovako Product Catalog / DIN EN 10277:2018-09 / ISO 683-3:2022 |
| 5115 | SAE J404-2009 / ASTM A29/A29M-2012 / SAE J404-2000 / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 / ASTM A1040-17(2022) |
| 17CrNi6-6 | BS EN 10263-3:2017 / ISO 4954:2018 / EN 10263-3-2017 / DIN EN 10084-2008 / DIN EN 10263-3-2002 / DIN EN 10263-3:2018-02 / ISO 683-3:2022 |
| 18CrNi8 | ZOLLERN · Materials steel profiles · 1.5920 |
| 8617 | SAE J404-2009 / ASTM A29/A29M-2012 / SAE J404-2000 / Nippon Steel Wire Rods / Bars & Wire Rods / ASTM A29/A29M-2023 |
| X19NiCrMo4 | ZOLLERN · Materials steel profiles · 1.2764 / DIN 17350:1980-10 · Table 3, notes 1 and 12; Table 6 |
| 15NiCr13 | DIN EN 10084-2008 / ISO 683-3:2022 |
| 3310 | SAE J1249:JUN2000 · Table 1 |
| SNC815 | JIS G 4053:2008 / JIS G 4053-2008 / Bars & Wire Rods / JIS G 4053:2023 |
| 31CrMoV9 | ISO 683-5:2014 · Table 3 |
Bảng tiêu chuẩn gốc (88)
18CrNi8 · Bảng gốc của nhà sản xuất
ZOLLERN · Materials steel profiles · 1.5920
Fe base. All values are mass %, and are maximum values unless a range is stated. Blank original cells are retained as “—”. The original manufacturer table is reproduced; it is not labelled as the text of a DIN, EN or ISO standard.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.15-0.20 |
| Si | 0.15-0.40 |
| Mn | 0.40-0.60 |
| P | 0.035 |
| S | 0.035 |
| Cr | 1.80-2.10 |
| Mo | — |
| Ni | 1.80-2.10 |
| Al | — |
| N | — |
| Cu | — |
20NiCrMo2-2 · Bảng gốc của nhà sản xuất
ZOLLERN · Materials steel profiles · 1.6523
Fe base. All values are mass %, and are maximum values unless a range is stated. Blank original cells are retained as “—”. The original manufacturer table is reproduced; it is not labelled as the text of a DIN, EN or ISO standard.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.17-0.23 |
| Si | 0.40 |
| Mn | 0.65-0.95 |
| P | 0.025 |
| S | 0.035 |
| Cr | 0.35-0.70 |
| Mo | 0.15-0.25 |
| Ni | 0.40-0.70 |
| Al | — |
| N | — |
| Cu | — |
C53G · Bảng gốc của nhà sản xuất
ZOLLERN · Materials steel profiles · 1.1213
Fe base. All values are mass %, and are maximum values unless a range is stated. Blank original cells are retained as “—”. The original manufacturer table is reproduced; it is not labelled as the text of a DIN, EN or ISO standard.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.50-0.57 |
| Si | 0.15-0.35 |
| Mn | 0.40-0.70 |
| P | 0.025 |
| S | 0.035 |
| Cr | — |
| Mo | — |
| Ni | — |
| V | — |
| Al | — |
| Cu | — |
Cf53 / C53G · DIN 17212 · Bảng tiêu chuẩn lịch sử
DIN 17212:1972-08 · Tables 1 and 4
Original DIN row: Cf 53, 1.1213; catalogue alias C53G retained. Complete table values and applicable notes follow. Ladle and product analyses remain distinct. The source link opens the original standard.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0,50 to 0,57 |
| Si | 0,15 to 0,35 |
| Mn | 0,40 to 0,70 |
| P | ≤0,025 |
| S | ≤0,035 |
| Cr | — |
| Mo | — |
DIN 17212:1972-08 — Table 1 Chemical composition of flame and induction hardening steels (ladle analysis), % by wt. DIN grade | Material no. | Euronorm 86-70 | ISO 683/XII-1972 | C | Si | Mn | P maximum | S maximum | Cr | Mo Cf 35 | 1.1183 | C 36 | 1 | 0,33 to 0,39 | 0,15 to 0,35 | 0,50 to 0,80 | 0,025 | 0,035 | — | — Cf 45 | 1.1193 | C 46 | 3 | 0,43 to 0,49 | 0,15 to 0,35 | 0,50 to 0,80 | 0,025 | 0,035 | — | — Cf 53 | 1.1213 | C 53 | 5 | 0,50 to 0,57 | 0,15 to 0,35 | 0,40 to 0,70 | 0,025 | 0,035 | — | — Cf 70 | 1.1249 | — | — | 0,68 to 0,75 | 0,15 to 0,35 | 0,20 to 0,35 | 0,025 | 0,035 | — | — 45 Cr 2 | 1.7005 | 45 Cr 2 | 6 | 0,42 to 0,48 | 0,15 to 0,40 | 0,50 to 0,80 | 0,025 | 0,035 | 0,40 to 0,60 | — 38 Cr 4 | 1.7043 | 38 Cr 4 | 7 | 0,34 to 0,40 | 0,15 to 0,40 | 0,60 to 0,90 | 0,025 | 0,035 | 0,90 to 1,20 | — 42 Cr 4 | 1.7045 | — | 8 | 0,38 to 0,44 | 0,15 to 0,40 | 0,50 to 0,80 | 0,025 | 0,035 | 0,90 to 1,20 | — 41 CrMo 4 | 1.7223 | 41 CrMo 4 | 9 | 0,38 to 0,44 | 0,15 to 0,40 | 0,50 to 0,80 | 0,025 | 0,035 | 0,90 to 1,20 | 0,15 to 0,30 49 CrMo 4 | 1.7238 | — | — | 0,46 to 0,52 | 0,15 to 0,40 | 0,50 to 0,80 | 0,025 | 0,035 | 0,90 to 1,20 | 0,15 to 0,30 Table 1, footnote 1: Unlisted elements require purchaser agreement for intentional additions, apart from finishing the ladle; precautions must prevent harmful additions from scrap and other manufacturing materials. Original wording is available through the source link. Table 4 — Permissible product-analysis variations from ladle-analysis limits, % by wt. Applies to cross-sections up to 10 000 mm² for unalloyed steels and up to 62 500 mm² for alloy steels. Element | Permissible maximum content in the ladle analysis | Permissible variation C | ≤0,55 | ±0,02 C | >0,55 and ≤0,75 | ±0,03 Si | ≤0,40 | ±0,03 Mn | ≤0,90 | ±0,04 P | ≤0,025 | +0,005 / 0 S | ≤0,035 | +0,005 / 0 Cr | ≤1,20 | ±0,05 Mo | ≤0,30 | ±0,03 Table 4, footnote 1: Multiple product analyses of one ladle may deviate below the minimum or above the maximum of an element's range, but not on both sides for the same element. 7.3.1: Product-analysis values are guaranteed for delivery modes 1 to 1 c; ladle-analysis values for the other modes (2 to 11 k). 7.3.2: For modes 1 to 1 c, verification with the Table 4 variations from Table 1 may be agreed when ordering. 7.3.3: For modes 2 to 11 k, minor deviations from Table 1 ladle limits are permitted if the stated hardenability or mechanical properties for the mode are maintained. Original tables and delivery-mode definitions are available through the linked standard.
58CrMoV4 · Bảng gốc của nhà sản xuất
ZOLLERN · Materials steel profiles · 1.7792
Fe base. All values are mass %, and are maximum values unless a range is stated. Blank original cells are retained as “—”. The original manufacturer table is reproduced; it is not labelled as the text of a DIN, EN or ISO standard.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.58-0.62 |
| Si | 0.20-0.30 |
| Mn | 0.80-0.95 |
| P | 0.020 |
| S | 0.010 |
| Cr | 0.90-1.05 |
| Mo | 0.15-0.20 |
| Ni | — |
| V | 0.10-0.15 |
| Al | — |
| Cu | 0.14 |
X19NiCrMo4 · Bảng gốc của nhà sản xuất
ZOLLERN · Materials steel profiles · 1.2764
Fe base. All values are mass %, and are maximum values unless a range is stated. Blank original cells are retained as “—”. The original manufacturer table is reproduced; it is not labelled as the text of a DIN, EN or ISO standard.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.16-0.22 |
| Si | 0.10-0.40 |
| Mn | 0.15-0.45 |
| P | 0.030 |
| S | 0.030 |
| Cr | 1.10-1.40 |
| Mo | 0.15-0.25 |
| Ni | 3.80-4.30 |
| V | — |
X19NiCrMo4 · DIN 17350 · Bảng tiêu chuẩn lịch sử
DIN 17350:1980-10 · Table 3, notes 1 and 12; Table 6
All original elemental entries, including V/W dashes, are retained. Note 12 permits Mo/W replacement, not an independent mandatory W range. All 28 Table 6 variations follow; Co is not Ni. Original standard wording is accessible through the source link.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0,16 bis 0,22 |
| Si | 0,10 bis 0,40 |
| Mn | 0,15 bis 0,45 |
| P | ≤0,030 (1) |
| S | ≤0,030 (1) |
| Cr | 1,10 bis 1,40 |
| Mo | 0,15 bis 0,25 (12) |
| Ni | 3,80 bis 4,30 |
| V | — |
| W | — |
DIN 17350:1980-10 — Table 3, X19NiCrMo4 / 1.2764, ladle analysis, mass % Element | Original value C | 0,16 bis 0,22 Si | 0,10 bis 0,40 Mn | 0,15 bis 0,45 P | ≤0,030 (1) S | ≤0,030 (1) Cr | 1,10 bis 1,40 Mo | 0,15 bis 0,25 (12) Ni | 3,80 bis 4,30 V | — W | — Note 1: P and S are each limited to 0,030 mass % for the steels in Table 3. Original note 12: Das Molybdän kann durch Zugabe von 0,30 bis 0,50 % Wolfram ersetzt werden. This is a Mo/W replacement option, not a simultaneous requirement for both elements. Table 6 — Product-analysis variations from ladle-analysis limits, mass % Element | Ladle-analysis maximum-content category | Permitted variation C | ≤1,00 | ±0,03 C | >1,00 and ≤1,50 | ±0,04 C | >1,50 and ≤2,25 | ±0,05 Si | ≤1,00 | ±0,03 Si | >1,00 and ≤1,20 | ±0,05 Mn | ≤1,00 | ±0,04 Mn | >1,00 and ≤2,10 | ±0,08 P | ≤0,035 | +0,005 / 0 S | ≤0,05 | +0,005 / 0 S | >0,05 and ≤0,15 | ±0,01 Co | ≤5,00 | ±0,10 Co | >5,00 and ≤10,50 | ±0,15 Cr | ≤1,00 | ±0,05 Cr | >1,00 and ≤3,00 | ±0,07 Cr | >3,00 and ≤10,00 | ±0,10 Cr | >10,00 and ≤17,00 | ±0,15 Mo | ≤0,50 | ±0,04 Mo | >0,50 and ≤1,00 | ±0,05 Mo | >1,00 and ≤10,00 | ±0,10 V | ≤0,30 | ±0,02 V | >0,30 and ≤0,50 | ±0,04 V | >0,50 and ≤1,00 | ±0,07 V | >1,00 and ≤4,00 | ±0,10 W | ≤1,00 | ±0,05 W | >1,00 and ≤2,00 | ±0,07 W | >2,00 and ≤5,00 | ±0,10 W | >5,00 and ≤10,00 | ±0,15 W | >10,00 and ≤18,50 | ±0,20 Table 6 note 1: Across multiple product analyses from one heat, an element may exceed only one side of its ladle-analysis range, not both. Table 6 contains Co, with no Ni-specific row; Co variations must not be substituted for Ni. 8.3.1: Small ladle-analysis deviations require compliance with 8.4 and no adverse effect on service properties or processability. 8.3.2: Table 6 covers diameters up to 160 mm or equivalent dimensions; deviations for larger sizes require order-stage agreement. Original standard tables, their complete layout and wording are accessible through the source link.
3310 · Bảng tiêu chuẩn lịch sử
SAE J1249:JUN2000 · Table 1
Table 1, former standard SAE steels. P/S limits apply to semi-finished products for forgings, bars, wire rods and seamless tubing. Footnote 2: marked grades remain standard for wire rods. Footnote 3: marked boron grades contain 0.0005 to 0.003% B. These footnotes are retained with the complete original table; 3310 and 6145 do not carry marks 2 or 3.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| UNS No. | — |
| C | 0.08–0.13 |
| Mn | 0.45–0.60 |
| P, Max (1) | 0.025 |
| S, Max (1) | 0.025 |
| Si | 0.20–0.35 |
| Cr | 1.40–1.75 |
| Ni | 3.25–3.75 |
| Mo | — |
| V, Min | — |
| AISI No. | E3310 |
| Date | 1964 |
6145 · Bảng tiêu chuẩn lịch sử
SAE J1249:JUN2000 · Table 1
Table 1, former standard SAE steels. P/S limits apply to semi-finished products for forgings, bars, wire rods and seamless tubing. Footnote 2: marked grades remain standard for wire rods. Footnote 3: marked boron grades contain 0.0005 to 0.003% B. These footnotes are retained with the complete original table; 3310 and 6145 do not carry marks 2 or 3.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| UNS No. | — |
| C | 0.43–0.48 |
| Mn | 0.70–0.90 |
| P, Max (1) | 0.040 |
| S, Max (1) | 0.050 |
| Si | 0.20–0.35 |
| Cr | 0.80–1.10 |
| Ni | — |
| Mo | — |
| V, Min | 0.15 |
| AISI No. | 6145 |
| Date | 1956 |
SS490 · Bảng tiêu chuẩn gốc
JIS G 3101:2010 · Table 2
Mass %. Other alloying elements may be added as necessary. The original SS330 / SS400 / SS490 merged cells leave C and Mn unspecified; the dashes are retained.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | — |
| Mn | — |
| P | ≤0.050 |
| S | ≤0.050 |
S45CM · Bảng tiêu chuẩn gốc
JIS G 3311:2016 · Table 2
JIS G 3311:2016, 5.1 and Table 2; heat analysis, mass %. Elements absent from Tables 2–6 shall not be intentionally added without agreement, except for finishing the heat. The combined Ni+Cr maximum is an additional constraint. Product analysis, when requested, follows 5.2 and JIS G 0321 Tables 3 and 4; product-analysis tolerances are separate from these heat-analysis limits.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.42–0.48 |
| Si | 0.15–0.35 |
| Mn | 0.60–0.90 |
| P | ≤0.030 |
| S | ≤0.035 |
| Cu | ≤0.30 |
| Ni | ≤0.20 |
| Cr | ≤0.20 |
| Ni+Cr | ≤0.35 |
S50CM · Bảng tiêu chuẩn gốc
JIS G 3311:2016 · Table 2
JIS G 3311:2016, 5.1 and Table 2; heat analysis, mass %. Elements absent from Tables 2–6 shall not be intentionally added without agreement, except for finishing the heat. The combined Ni+Cr maximum is an additional constraint. Product analysis, when requested, follows 5.2 and JIS G 0321 Tables 3 and 4; product-analysis tolerances are separate from these heat-analysis limits.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.47–0.53 |
| Si | 0.15–0.35 |
| Mn | 0.60–0.90 |
| P | ≤0.030 |
| S | ≤0.035 |
| Cu | ≤0.30 |
| Ni | ≤0.20 |
| Cr | ≤0.20 |
| Ni+Cr | ≤0.35 |
S60CM · Bảng tiêu chuẩn gốc
JIS G 3311:2016 · Table 2
JIS G 3311:2016, 5.1 and Table 2; heat analysis, mass %. Elements absent from Tables 2–6 shall not be intentionally added without agreement, except for finishing the heat. The combined Ni+Cr maximum is an additional constraint. Product analysis, when requested, follows 5.2 and JIS G 0321 Tables 3 and 4; product-analysis tolerances are separate from these heat-analysis limits.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0.55–0.65 |
| Si | 0.15–0.35 |
| Mn | 0.60–0.90 |
| P | ≤0.030 |
| S | ≤0.035 |
| Cu | ≤0.30 |
| Ni | ≤0.20 |
| Cr | ≤0.20 |
| Ni+Cr | ≤0.35 |
31CrMoV9 · Bảng tiêu chuẩn gốc
ISO 683-5:2014 · Table 3
Cast analysis, mass %. A single value is a maximum. A lower sulfur maximum may be agreed. Unlisted elements require purchaser agreement except for finishing the heat; prevent unintended additions from scrap affecting properties and applicability. The full original Table 3 and its notes follow. Product-analysis deviations are a separate table.
| Nguyên tố | Phần khối lượng / % |
|---|---|
| C | 0,27 to 0,34 |
| Si | 0,40 |
| Mn | 0,40 to 0,70 |
| P | 0,025 |
| S | 0,035 |
| Cr | 2,30 to 2,70 |
| Mo | 0,15 to 0,25 |
| Ni | — |
| Al | — |
| V | 0,10 to 0,20 |
Table 3 — Steel grades and chemical composition (cast analysis) Steel name %, mass fractiona C Si Mn P S b Cr Mo Ni Al Others 20CrMoV5-7 0,16 to 0,24 0,40 0,40 to 0,80 0,025 0,035 1,20 to 1,50 0,65 to 0,80 - 0,30 V: 0,25 to 0,35 34CrAlMo5-10 0,30 to 0,37 0,40 0,40 to 0,70 0,025 0,035 1,00 to 1,30 0,15 to 0,25 - 0,80 to 1,20 - 32CrAlMo7-10 0,28 to 0,35 0,40 0,40 to 0,70 0,025 0,035 1,50 to 1,80 0,20 to 0,40 - 0,80 to 1,20 - 41CrAlMo7-10 0,38 to 0,45 0,40 040 to 0,70 0,025 0,035 1,50 to 1,80 0,20 to 0,35 - 0,80 to 1,20 - 34CrAlNi7-10 0,30 to 0,37 0,40 0,40 to 0,70 0,025 0,035 1,50 to 1,80 0,15 to 0,25 0,85 to 1,15 0,80 to 1,20 - 31CrMoV9 0,27 to 0,34 0,40 0,40 to 0,70 0,025 0,035 2,30 to 2,70 0,15 to 0,25 - - V: 0,10 to 0,20 31CrMo12 0,28 to 0,35 0,40 0,40 to 0,70 0,025 0,035 2,80 to 3,30 0,30 to 0,50 0,30 - - 33CrMoV12-9 0,29 to 0,36 0,40 0,40 to 0,70 0,025 0,035 2,80 to 3,30 0,70 to 1,00 - - V: 0,15 to 0,25 24CrMo13-6 0,20 to 0,27 0,40 0,40 to 0,70 0,025 0,035 3,00 to 3,50 0,50 to 0,70 - - - 40CrMoV13-9 0,36 to 0,43 0,40 0,40 to 0,70 0,025 0,035 3,00 to 3,50 0,80 to 1,10 - - V: 0,15 to 0,25 8CrMo16-5 0,04 to 0,12 0,40 0,85 to 1,20 0,025 0,035 3,70 to 4,30 0,40 to 0,60 - - Cu: 0,25 Elements not quoted shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat. All reasonable precautions should be taken to prevent the addition, from scrap or other materials used in manufacture, of such elements which affect the mechanical properties and applicability. a Maximum values unless otherwise indicated b By agreement between the purchaser and manufacturer, the steel may be ordered with an upper limit of sulfur less than 0,035 %.
ASTM A681 · all 51 types · Bảng tiêu chuẩn gốc
ASTM A681-08 (2022) · Table 1
Standard identifier; select an individual type before using a composition. All 51 original rows, precision, extra alloy entries and notes A–F are retained below. The original-standard text extract is fingerprinted separately from any PDF.
TABLE 1 Chemical Requirements, %A UNS DesignationB Type Carbon ManganeseC Phosphorus, max Sulfur,D max Silicon Chromium Vanadium Tungsten Molybdenum min max min max min max min max min max min max min max T20810 H10 0.35 0.45 0.20 0.70 0.030 0.030 0.80 1.25 3.00 3.75 0.25 0.75 . . . . . . 2.00 3.00 T20811 H11 0.33 0.43 0.20 0.60 0.030 0.030 0.80 1.25 4.75 5.50 0.30 0.60 . . . . . . 1.10 1.60 T20812 H12 0.30 0.40 0.20 0.60 0.030 0.030 0.80 1.25 4.75 5.50 0.20 0.50 1.00 1.70 1.25 1.75 T20813 H13 0.32 0.45 0.20 0.60 0.030 0.030 0.80 1.25 4.75 5.50 0.80 1.20 . . . . . . 1.10 1.75 T20814 H14 0.35 0.45 0.20 0.60 0.030 0.030 0.80 1.25 4.75 5.50 . . . . . . 4.00 5.25 . . . . . . T20819 H19 0.32 0.45 0.20 0.50 0.030 0.030 0.15 0.50 4.00 4.75 1.75 2.20 3.75 4.50 0.30 0.55 Co 4.00–4.50 T20821 H21 0.26 0.36 0.15 0.40 0.030 0.030 0.15 0.50 3.00 3.75 0.30 0.60 8.50 10.00 . . . . . . T20822 H22 0.30 0.40 0.15 0.40 0.030 0.030 0.15 0.40 1.75 3.75 0.25 0.50 10.00 11.75 . . . . . . T20823 H23 0.25 0.35 0.15 0.40 0.030 0.030 0.15 0.60 11.00 12.75 0.75 1.25 11.00 12.75 . . . . . . T20824 H24 0.42 0.53 0.15 0.40 0.030 0.030 0.15 0.40 2.50 3.50 0.40 0.60 14.00 16.00 . . . . . . T20825 H25 0.22 0.32 0.15 0.40 0.030 0.030 0.15 0.40 3.75 4.50 0.40 0.60 14.00 16.00 . . . . . . T20826 H26 0.45 0.55E 0.15 0.40 0.030 0.030 0.15 0.40 3.75 4.50 0.75 1.25 17.25 19.00 . . . . . . T20841 H41 0.60 0.75E 0.15 0.40 0.030 0.030 0.20 0.45 3.50 4.00 1.00 1.30 1.40 2.10 8.20 9.20 T20842 H42 0.55 0.70E 0.15 0.40 0.030 0.030 0.20 0.45 3.75 4.50 1.75 2.20 5.50 6.75 4.50 5.50 T20843 H43 0.50 0.65E 0.15 0.40 0.030 0.030 0.20 0.45 3.75 4.50 1.80 2.20 . . . . . . 7.75 8.50 T30102 A2 0.95 1.05 0.40 1.00 0.030 0.030 0.10 0.50 4.75 5.50 0.15 0.50 . . . . . . 0.90 1.40 T30103 A3 1.20 1.30 0.40 0.60 0.030 0.030 0.10 0.70 4.75 5.50 0.80 1.40 . . . . . . 0.90 1.40 T30104 A4 0.95 1.05 1.80 2.20 0.030 0.030 0.10 0.70 0.90 2.20 . . . . . . . . . . . . 0.90 1.40 T30105 A5 0.95 1.05 2.80 3.20 0.030 0.030 0.10 0.70 0.90 1.40 . . . . . . . . . . . . 0.90 1.40 T30106 A6 0.65 0.75 1.80 2.50 0.030 0.030 0.10 0.70 0.90 1.40 . . . . . . . . . . . . 0.90 1.40 T30107 A7 2.00 2.85 0.20 0.80 0.030 0.030 0.10 0.70 5.00 5.75 3.90 5.15 0.50 1.50 0.90 1.40 T30108 A8 0.50 0.60 0.20 0.50 0.030 0.030 0.75 1.10 4.75 5.50 . . . . . . 1.00 1.50 1.15 1.65 T30109 A9 0.45 0.55 0.20 0.50 0.030 0.030 0.95 1.15 4.75 5.50 0.80 1.40 . . . . . . 1.30 1.80 Ni 1.25–1.75 T30110 A10 1.25 1.50 1.60 2.10 0.030 0.030 1.00 1.50 . . . . . . . . . . . . . . . . . . 1.25 1.75 Ni 1.55–2.05 T30402 D2 1.40 1.60 0.10 0.60 0.030 0.030 0.10 0.60 11.00 13.00 0.50 1.10 . . . . . . 0.70 1.20 . . . T30403 D3 2.00 2.35 0.10 0.60 0.030 0.030 0.10 0.60 11.00 13.50 . . . 1.00 . . . 1.00 . . . . . . T30404 D4 2.05 2.40 0.10 0.60 0.030 0.030 0.10 0.60 11.00 13.00 0.15 1.00 . . . . . . 0.70 1.20 T30405 D5 1.40 1.60 0.10 0.60 0.030 0.030 0.10 0.60 11.00 13.00 . . . 1.00 . . . . . . 0.70 1.20 Co 2.50–3.50 T30407 D7 2.15 2.50 0.10 0.60 0.030 0.030 0.10 0.60 11.50 13.50 3.80 4.40 . . . . . . 0.70 1.20 T31501 O1 0.85 1.00 1.00 1.40 0.030 0.030 0.10 0.50 0.40 0.70 . . . 0.30 0.40 0.60 . . . . . . T31502 O2 0.85 0.95 1.40 1.80 0.030 0.030 . . . 0.50 . . . 0.50 . . . 0.30 . . . . . . . . . 0.30 T31506 O6 1.25 1.55 0.30 1.10 0.030 0.030 0.55 1.50 . . . 0.30 . . . . . . . . . . . . 0.20 0.30 T31507 O7 1.10 1.30 0.20 1.00 0.030 0.030 0.10 0.60 0.35 0.85 0.15 0.40 1.00 2.00 . . . 0.30 T41901 S1 0.40 0.55 0.10 0.40 0.030 0.030 0.15 1.20 1.00 1.80 0.15 0.30 1.50 3.00 . . . 0.50 T41902 S2 0.40 0.55 0.30 0.50 0.030 0.030 0.90 1.20 . . . . . . . . . 0.50 . . . . . . 0.30 0.60 T41904 S4 0.50 0.65 0.60 0.95 0.030 0.030 1.75 2.25 0.10 0.50 0.15 0.35 . . . . . . . . . . . . . . . . . . T41905 S5 0.50 0.65 0.60 1.00 0.030 0.030 1.75 2.25 0.10 0.50 0.15 0.35 . . . . . . 0.20 1.35 . . . . . . T41906 S6 0.40 0.50 1.20 1.50 0.030 0.030 2.00 2.50 1.20 1.50 0.20 0.40 . . . . . . 0.30 0.50 . . . . . . T41907 S7 0.45 0.55 0.20 0.90 0.030 0.030 0.20 1.00 3.00 3.50 . . . 0.35 . . . . . . 1.30 1.80 . . . . . . T61202 L2 0.45 1.00 0.10 0.90 0.030 0.030 0.10 0.50 0.70 1.20 0.10 0.30 . . . . . . . . . 0.25 . . . . . . T61203 L3 0.95 1.10 0.25 0.80 0.030 0.030 0.10 0.50 1.30 1.70 0.10 0.30 . . . . . . . . . . . . . . . . . . Nickel T61206 L6 0.65 0.75 0.25 0.80 0.030 0.030 0.10 0.50 0.60 1.20 . . . . . . . . . . . . . . . 0.50 1.25 2.00 T60601 F1 0.95 1.25 . . . 0.50 0.030 0.030 0.10 0.50 . . . . . . . . . . . . 1.00 1.75 . . . . . . . . . . . . T60602 F2 1.20 1.40 0.10 0.50 0.030 0.030 0.10 0.50 0.20 0.40 . . . . . . 3.00 4.50 . . . . . . . . . . . . T51602 P2 . . . 0.10 0.10 0.40 0.030 0.030 0.10 0.40 0.75 1.25 . . . . . . . . . . . . 0.15 0.40 0.10 0.50 T51603 P3 . . . 0.10 0.20 0.60 0.030 0.030 . . . 0.40 0.40 0.75 . . . . . . . . . . . . . . . . . . 1.00 1.50 T51604 P4 . . . 0.12 0.20 0.60 0.030 0.030 0.10 0.40 4.00 5.25 . . . . . . . . . . . . 0.40 1.00 . . . . . . T51605 P5 0.06 0.10 0.20 0.60 0.030 0.030 0.10 0.40 2.00 2.50 . . . . . . . . . . . . . . . . . . . . . 0.35 T51606 P6 0.05 0.15 0.35 0.70 0.030 0.030 0.10 0.40 1.25 1.75 . . . . . . . . . . . . . . . . . . 3.25 3.75 T51620 P20 0.28 0.40 0.60 1.00 0.030 0.030 0.20 0.80 1.40 2.00 . . . . . . . . . . . . 0.30 0.55 . . . . . . T51621 P21F 0.18 0.22 0.20 0.40 0.030 0.030 0.20 0.40 0.20 0.30 0.15 0.25 . . . . . . . . . . . . 3.90 4.25 A Chemistry limits include product analysis tolerances. Unless otherwise specified, nickel plus copper equal 0.75 % max for all types. B New designation established in accordance with Practice E527 and SAE J1086. C Manganese limit is 1.0 % max for H13 resulfurized. D Where specified, sulfur may be 0.06 % to 0.15 % to improve machinability. E Available in several carbon ranges. F Also contains 1.05 % to 1.25 % aluminum. A681 − 08 (2022) 3
ASTM A738 · Grades A–E · Bảng tiêu chuẩn gốc
ASTM A738/A738M-07 · Table 1
Standard identifier, not an individual steel grade. Mass %. All five grades, heat/product distinctions, thickness conditions and notes A–G are retained.
| Element / analysis / thickness | Grade A | Grade B | Grade C | Grade D | Grade E |
|---|---|---|---|---|---|
| C, max (A) | 0.24 | 0.20 | 0.20 | 0.10 | 0.12 (B) |
| Mn, heat, ≤1.5 in. [40 mm] | 1.50 max | 0.90–1.50 | 1.50 max | 1.00–1.60 | 1.10–1.60 (B) |
| Mn, heat, >1.5–2.5 in. [40–65 mm] incl. | 1.50 max | 0.90–1.50 | 1.50 max | C | C |
| Mn, heat, >2.5 in. [65 mm] | 1.60 max | 0.90–1.60 | 1.60 max | C | C |
| Mn, product, ≤1.5 in. [40 mm] | 1.62 max | 0.84–1.62 | 1.62 max | 0.92–1.72 | 1.02–1.72 (B) |
| Mn, product, >1.5–2.5 in. [40–65 mm] incl. | 1.62 max | 0.84–1.62 | 1.62 max | C | C |
| Mn, product, >2.5 in. [65 mm] | 1.72 max | 0.84–1.72 | 1.72 max | C | C |
| P, max (A) | 0.035 | 0.030 | 0.025 | 0.015 | 0.015 |
| S, max (A) | 0.035 | 0.030 | 0.025 | 0.006 | 0.006 |
| Si, heat | 0.15–0.50 | 0.15–0.55 | 0.15–0.50 | 0.15–0.50 | 0.15–0.50 |
| Si, product | 0.13–0.55 | 0.13–0.60 | 0.13–0.55 | 0.13–0.55 | 0.13–0.55 |
| Cu, heat, max | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 |
| Cu, product, max | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 |
| Ni, heat, max | 0.50 | 0.60 | 0.50 | 0.60 | 0.70 |
| Ni, product, max | 0.53 | 0.63 | 0.53 | 0.63 | 0.73 |
| Cr, heat, max | 0.25 | 0.30 | 0.25 | 0.25 | 0.30 |
| Cr, product, max | 0.29 | 0.34 | 0.29 | 0.29 | 0.34 |
| Mo, heat, ≤1.5 in. [40 mm], max | 0.08 | 0.20 | 0.08 | 0.30 | 0.35 |
| Mo, heat, >1.5 in. [40 mm], max | 0.08 | 0.30 | 0.08 | C | C |
| Mo, product, ≤1.5 in. [40 mm], max | 0.09 | 0.21 | 0.09 | 0.33 | 0.38 |
| Mo, product, >1.5 in. [40 mm], max | 0.09 | 0.33 | 0.09 | C | C |
| V, heat, max | 0.07 (D) | 0.07 | 0.05 | 0.08 | 0.09 |
| V, product, max | 0.08 (D) | 0.08 | 0.05 | 0.09 | 0.10 |
| Nb, heat, max | 0.04 (D) | 0.04 | E | 0.05 | 0.05 |
| Nb, product, max | 0.05 (D) | 0.05 | E | 0.06 | 0.06 |
| Nb+V, heat, max | 0.08 (D) | 0.08 | E | 0.11 | 0.12 |
| Nb+V, product, max | 0.10 (D) | 0.10 | E | 0.12 | 0.13 |
| Ti, max (A) | ... | ... | ... | F | G |
| B, max (A) | ... | ... | ... | 0.0007 | 0.0007 |
| Al, min (A) | ... | ... | ... | 0.020 total or 0.015 acid soluble (F) | 0.020 total or 0.015 acid soluble (G) |
A: Applies to heat and product analyses.
B: For every 0.01 percentage-point decrease from the carbon maximum, the Mn maximum may rise by 0.06 percentage point, limited to 1.85% heat and 1.99% product analysis.
C: Not applicable.
D: V and Nb additions require manufacturer/purchaser agreement.
E: Nb is unspecified for Grade C.
F: If agreed, Ti may replace the Al minimum; heat Ti must be 0.006% to 0.03%, and both heat and product Ti must be reported.
G: The same agreed Ti option applies to Grade E; the original explicitly states inclusive 0.006% to 0.03%, and requires heat/product Ti reporting.
Nguồn: ASTM A29/A29M-2023






Nguồn: SAE J403-2014






Nguồn: SAE J403 NOV2001




Nguồn: ASTM A29/A29M-2012





Nguồn: Nippon Steel Wire Rods









Nguồn: Bars & Wire Rods








Nguồn: FHSProductManual_WireRod_EN


Nguồn: AGT2282 Carbon & Alloy Steel Specification



Nguồn: ASTM A1040-17(2022)



Nguồn: JIS G 3506:2024





Nguồn: JIS G 4053:2008 / JIS G 4053-2008


Nguồn: Q/BQB 517—2023







Nguồn: DIN 17200-1987-03





Nguồn: ISO 4954:2018




Nguồn: ISO 4954:2018









Nguồn: EN 10263-4-2017 / BS EN 10263-4:2017


Nguồn: NF EN 10269-1999 / NF EN 10269:1999



Nguồn: DIN EN 10083-3-2007 / EN 10083-3-2006


Nguồn: EN ISO 683-2-2018 / ISO 683-2-2016



Nguồn: EN 10132-3:2000




Nguồn: BEXG 021-2020












Nguồn: Ovako Product Catalog






Nguồn: DIN EN 10277:2018-09 / EN 10277-2018




Nguồn: DIN EN 10089-2003





Nguồn: DIN EN 10132-4-2000(+AC:2002)


Nguồn: BS EN 10089:2002 (EN 10089:2002)




Nguồn: ISO 683-6:2023 / BS ISO 683-6:2023


Nguồn: DIN EN ISO 683-17:2015-02


Nguồn: EN 10025-2-2019








Nguồn: JIS G 3101:2010 / JIS G 3101:2010 · Table 2




Nguồn: EN ISO 683-4:2018







Nguồn: JIS G 4051-2016





Nguồn: BS EN ISO 4957:2018





Nguồn: DIN EN 10263-3-2002 / EN 10263-3-2001


Nguồn: ISO 683-18-1996




Nguồn: EN 10132-2:2000




Nguồn: BS EN 10263-3:2017 / EN 10263-3-2017


Nguồn: ZOLLERN · Materials steel profiles · 1.5920 / ZOLLERN · Materials steel profiles · 1.6523 / ZOLLERN · Materials steel profiles · 1.1213 / ZOLLERN · Materials steel profiles · 1.7792 / ZOLLERN · Materials steel profiles · 1.2764











Nguồn: SAE J1249:JUN2000 · Table 1






1.Danh sách vật liệu có thể sử dụng
| Mục đích sử dụng | Material No. | DIN EN ISO | ASTM/AISI | JIS |
|---|---|---|---|---|
| 1.0304 | AISI 1008 | SWRM 8 | ||
| 1.031 | AISI 1010 | SWRM 10 | ||
| 1.0541 | AISI 1040 | SWRH 42A | ||
| 1.0517 | AISI 1045 | SWRH 47A | ||
| 1.0609 | SWRH 57A | |||
| 1.0611 | SWRH 62A | |||
| 1.0620 | SWRH 77B | |||
| 1.0626 | SWRH 82A | |||
| 1.0737 | AISI 12L14 | SUM24L | ||
| 1.0762 | AISI 1144 | SUM43 | ||
| 1.7243 | SAE 4118 | SCM415 | ||
| 1.7220 | SAE 4135 | SCM435 | ||
| 1.7225 | 42CrMo4 | SAE 4140 | SCM440 | |
| 1.6523 | 20NiCrMo2-2 | SAE 8620 | SNCM220 | |
| 1.8159 | 51CrV4 | SAE 6150 | SUP10 | |
| 1.7104 | SAE 9254 | SUP12 | ||
| 1.2067 | 100Cr6 | SAE 52100 | SUJ2 | |
| Thép kết cấu | 1.0038 | S235JR | 1015 | SS330 |
| 1.0577 | S355J2 | A738 | ||
| 1.0050 | E295 | SS490 | ||
| 1.0060 | E335 | SM570 | ||
| Thép dễ cắt gọt | 1.0715 | 11SMn30 | 1213、1215 | SUM22 |
| 1.0718 | 11SMnPb30 | 12L13 | SUM22L | |
| 1.0726 | 35S20 | 1140 | ||
| 1.0727 | 46S20 | 1146 | ||
| Thép nhiệt luyện | 1.0503 | C45 | 1043、1045 | S45CM,S45C |
| 1.0601 | C60 | 1060 | S60CM,S60C | |
| 1.7218 | 25CrMo4 | 4130 | SCM430 | |
| 1.7225 | 42CrMo4 | 4140 | SCM440 | |
| Thép ổ con lăn và thép dụng cụ | 1.7792 | 58CrMoV4 | ||
| 1.3505 | 100Cr6 | E52100 | SUJ2 | |
| 1.1213 | C53G | 1050、1055 | S50CM,S50C | |
| 1.2842 | 90MnCrV8 | A681 | ||
| 1.7177 | 60Cr3 | |||
| 1.8159 | 51CrV4 | 6145 | SUP10 | |
| Thép hóa cứng bề mặt và thép thấm nitơ | 1.0401 | C15 | 1015、1017 | S15C |
| 1.7131 | 16MnCr5 | 5115 | ||
| 1.5918 | 17CrNi6-6 | |||
| 1.5920 | 18CrNi8 | |||
| 1.6523 | 20NiCrMo2-2 | 8617\8620 | SNCM220 | |
| 1.2764 | X19NiCrMo4 | |||
| 1.5752 | 15NiCr13 | 3310 | SNC815 | |
| 1.8519 | 31CrMoV9 |
2.Chất lượng bề mặt
2.1 Thép hình cán nóng
Độ nhám bề mặt: Ra < 40 micromet
Dung sai kích thước: tối đa 0.5 mm
Độ thẳng: ký hiệu gốc “s”, cần xác nhận.
1.0 mm/m; theo yêu cầu có thể < 0.3mm/m
Độ xoắn: nguồn ghi “tiêu chuẩn 1/m”; theo yêu cầu “s 0.5/m”. Ký hiệu và đơn vị cần xác nhận.
Tiết diện ngang: 10mm - 7000mm
Chiều dài: ≤ 12 m hoặc cắt theo kích thước cố định
2.2 Thép hình cán nguội/kéo nguội
Độ nhám bề mặt: Ra ≤
2.5 microns
Thoát cacbon: ≤ 0.1mm
Độ thẳng: ≤ 0.1mm/m
Độ xoắn: 0.25° /m
Dung sai kích thước: ≤ 0.05mm
Tiết diện ngang: 1mm - 3800mm
Chiều dài: ≤ 6 m hoặc cắt theo kích thước cố định




































































