SUS304N1
1 source records. Standards, editions and conditions are presented separately; matching grade names do not establish interchangeability.
Refer to each source for mass fractions and analysis type. Missing values are not treated as 0. Manufacturer typical values, standard guarantees and measured heat results must remain separate. Use the material selector for calculations and condition selection.
Open condition selection, comparison and carbon-equivalent tools for SUS304N1 →SUS304N1 · JIS G 4308-1998
Chemical composition source verified; this does not verify every standard clause, actual supply or measured heat results
- Subcategory
- Austenitic stainless steel
- Material form
- Stainless-steel wire rod
- Original record status
- Original standard verified
- Standard edition
- JIS G 4308:1998
- Table / clause
- Main text: Table 1 / Table 2 · Footnotes
- PDF page references
- 1、2
- Unit
- Mass fraction (%)
- Analysis type
- Heat analysis
Carbon-equivalent reference
Composition
| Element | Composition requirement |
|---|---|
| C | ≤ 0.08 (lower limit not stated) |
| Si | ≤ 1.0 (lower limit not stated) |
| Mn | ≤ 2.5 (lower limit not stated) |
| P | ≤ 0.045 (lower limit not stated) |
| S | ≤ 0.03 (lower limit not stated) |
| Ni | 7.0 ～ 10.5 |
| Cr | 18.0 ～ 20.0 |
| N | 0.1 ～ 0.25 |
Applicability and limitations
JIS G 4308:1998: main-text Table 1 in the scanned Japanese original lists SUS304N1; main-text Table 2 gives heat analysis, mass fraction %. This edition covers stainless steel wire. The reference suffix -WR does not create another default grade. Standard wire diameters are given in Table 6; product-analysis deviations under clause 4.2 require separate verification. Cold-heading suitability, stocked sizes and supply by our company are not automatically established.