SUS 329J4L

JIS G 4305:2021, Table 4, heat analysis, mass fractions wt%; Each actual edition is retained separately. Applicable to cold-rolled stainless steel plate, sheet and strip; this does not establish suitability for delivery as cold-heading wire or guarantee cold-heading process performance. 5.2 product analysis permits variations under JIS G0321, Table 5; unlisted items require agreement between the parties; Heat-analysis limits are not directly widened in this batch. A dash indicates that no general limit is specified and is not treated as 0; Conventional welding carbon-equivalent formulas for low-alloy steels do not apply to this stainless steel category. Original table note: where unspecified Cu/W is added as needed, its content must be reported; No general limit is specified; a guaranteed range is not invented.

The original Japanese edition JIS G 4308:2013, Table 3, row 1, heat-analysis mass percentages. ; The standard covers hot-rolled stainless steel wire rod; Product-analysis tolerances must be checked under JIS G 0321 and purchaser requirements; tolerances are not included in the default heat-analysis range. ; Material designation and chemical composition do not establish cold-heading suitability or a supply commitment from Creation Group; Dimensions, delivery and processing condition require separate verification. ; Table 3 separately lists N composition, recorded as in the original table. ; Table 3, footnote: where Cu and W are added as needed, their contents must be reported; No general limits are specified.

A material-database match does not establish cold-heading suitability or a finished-product strength commitment; Confirmation requires the actual wire condition, reduction, heat treatment and physical testing. ; The original Japanese 2005, Table 1 confirms this bar-grade designation; Composition and property sources require separate verification under Table 2—6 and the applicable condition.

A match in the materials database does not establish suitability for cold heading or guarantee finished-product strength. Confirmation must consider wire condition, deformation, heat treatment and tests on actual parts.

A match in the materials database does not establish suitability for cold heading or guarantee finished-product strength. Confirmation must consider wire condition, deformation, heat treatment and tests on actual parts.

A match in the materials database does not establish suitability for cold heading or guarantee finished-product strength. Confirmation must consider wire condition, deformation, heat treatment and tests on actual parts.

A match in the materials database does not establish suitability for cold heading or guarantee finished-product strength. Confirmation must consider wire condition, deformation, heat treatment and tests on actual parts.