← BackMaterial grade directory

STELLITE NO.12

1 source records. Standards, editions and conditions are presented separately; matching grade names do not establish interchangeability.

Refer to each source for mass fractions and analysis type. Missing values are not treated as 0. Manufacturer typical values, standard guarantees and measured heat results must remain separate. Use the material selector for calculations and condition selection.

Open condition selection, comparison and carbon-equivalent tools for STELLITE NO.12 →

stellite No.12 · No corresponding standard is provided

Original-source verification is incomplete; this is not a formal standard reference

Material category
Alloy steel
Subcategory
Other metallic materials
Material form
Reference record
Composition basis
Manufacturer typical composition range
Verification status
Reference data; original source not verified
Document title
Stellite12 Alloy official web data; accessed2026-10-13
Table / clause
Nominal Composition (Mass %) and Physical Properties
PDF page references
    Manufacturer
    Kennametal Stellite

    Source document

    Carbon-equivalent reference

    IIW / CEV: not directly applicable to this material category
    Pcm (Ito–Bessyo): not directly applicable to this material category
    CET: not directly applicable to this material category

    Composition

    ElementComposition requirement
    CoCobalt base (no numerical value stated)
    Cr27 ~ 32
    W7.5 ~ 9.5
    C1.4 ~ 2
    NiListed as another element; no numerical value stated
    FeListed as another element; no numerical value stated
    SiListed as another element; no numerical value stated
    MnListed as another element; no numerical value stated

    Applicability and limitations

    According to the nominal composition table of Stellite 12 from the manufacturer's official website, Cr 27–32%, W 7.5–9.5%, C 1.4–2.0%; Co is only marked as the base and no numerical value is given. Ni/Fe/Si/Mn are listed as other elements but have no numerical limits; do not fill with zero or treat as fully guaranteed components. UNS lists R30012 for bars/castings, W73012 for welding electrodes, and W73042 for welding wires according to form; Different forms or standards shall not be directly equated based on the same brand name.

    Verification notes

    Manufacturer nominal composition range; For other elements where no value is given, do not fill with zero
    WhatsApp Technical enquiry →