G41210
3 source records. Standards, editions and conditions are presented separately; matching grade names do not establish interchangeability.
Refer to each source for mass fractions and analysis type. Missing values are not treated as 0. Manufacturer typical values, standard guarantees and measured heat results must remain separate. Use the material selector for calculations and condition selection.
Open condition selection, comparison and carbon-equivalent tools for G41210 →G41210 · ASTM A29/A29M-2012
Original-source verification is incomplete; this is not a formal standard reference
- Material category
- Alloy steel
- Subcategory
- Alloy steel
- Material form
- Reference record
- Verification status
- Reference data; original source not verified
Carbon-equivalent reference
Composition
| Element | Composition requirement |
|---|---|
| C | 0.18 ～ 0.23 |
| Cr | 0.45 ～ 0.65 |
| Mn | 0.75 ～ 1 |
| Mo | 0.2 ～ 0.3 |
| P | ≤ 0.035 (lower limit not stated) |
| S | ≤ 0.04 (lower limit not stated) |
Applicability and limitations
The formal correspondence between original-record name G41210 and 4121 listed in ASTM still requires evidence; Similar numbers alone do not establish the same grade identity. A material-database match does not establish cold-heading suitability or a finished-product strength commitment; Confirmation requires the actual wire condition, reduction, heat treatment and physical testing.
G41210 · ASTM A29/A29M-2020
Original-source verification is incomplete; this is not a formal standard reference
- Material category
- Alloy steel
- Subcategory
- Alloy steel
- Material form
- Reference record
- Verification status
- Reference data; original source not verified
Carbon-equivalent reference
Composition
| Element | Composition requirement |
|---|---|
| C | 0.18 ～ 0.23 |
| Cr | 0.45 ～ 0.65 |
| Mn | 0.75 ～ 1 |
| Mo | 0.2 ～ 0.3 |
| P | ≤ 0.035 (lower limit not stated) |
| S | ≤ 0.04 (lower limit not stated) |
Applicability and limitations
The formal correspondence between original-record name G41210 and 4121 listed in ASTM still requires evidence; Similar numbers alone do not establish the same grade identity. A material-database match does not establish cold-heading suitability or a finished-product strength commitment; Confirmation requires the actual wire condition, reduction, heat treatment and physical testing.
G41210 · ASTM A29/A29M-2023
Original-source verification is incomplete; this is not a formal standard reference
- Material category
- Alloy steel
- Subcategory
- Alloy steel
- Material form
- Reference record
- Verification status
- Reference data; original source not verified
Carbon-equivalent reference
Composition
| Element | Composition requirement |
|---|---|
| C | 0.18 ～ 0.23 |
| Cr | 0.45 ～ 0.65 |
| Mn | 0.75 ～ 1 |
| Mo | 0.2 ～ 0.3 |
| P | ≤ 0.035 (lower limit not stated) |
| S | ≤ 0.04 (lower limit not stated) |
Applicability and limitations
The formal correspondence between original-record name G41210 and 4121 listed in ASTM still requires evidence; Similar numbers alone do not establish the same grade identity. A material-database match does not establish cold-heading suitability or a finished-product strength commitment; Confirmation requires the actual wire condition, reduction, heat treatment and physical testing.