E335

EN10025-2:2019 Table 2 heat analysis: P≤.045%, S≤.045%, N≤.012%; FN does not allow rimmed steel. ; Carbon range is not specified in this table and shall not be copied from other grades; Complete calculation results for carbon equivalent cannot be provided when C is missing. ; For elements not defined, 7.2.1 refers to the upper limits in EN10020:2000 Table 1.; Do not invent unlisted ranges for C/P/S/N. ; Table 2, Note c raises S by .010 for long products with improved machinability, whereas Clause 13, Option 27 states .015; the discrepancy is retained.; Special increase in S is not open; ordinary table values are retained.. ; Table 2, Note d: The N upper limit need not apply when total Al≥.020% or sufficient other nitrogen-fixing elements are present, with the condition recorded in the inspection certificate.; This condition shall be selected after verification. ; Standard CEV upper limits in Table 5 are listed only for S235/S275/S355/S460/S500 and shall not be applied to E295/E335/E360. ; Reference for hot-rolled structural steel materials; cold-heading process and supply applicability shall be verified separately; Not automatically added to product center.

EN10025-2:2019 Table 2 heat analysis: P≤.045%, S≤.045%, N≤.012%; FN does not allow rimmed steel. ; Carbon range is not specified in this table and shall not be copied from other grades; Complete calculation results for carbon equivalent cannot be provided when C is missing. ; For elements not defined, 7.2.1 refers to the upper limits in EN10020:2000 Table 1.; Do not invent unlisted ranges for C/P/S/N. ; Table 2, Note c raises S by .010 for long products with improved machinability, whereas Clause 13, Option 27 states .015; the discrepancy is retained.; Special increase in S is not open; ordinary table values are retained.. ; Table 2, Note d: The N upper limit need not apply when total Al≥.020% or sufficient other nitrogen-fixing elements are present, with the condition recorded in the inspection certificate.; This condition shall be selected after verification. ; Standard CEV upper limits in Table 5 are listed only for S235/S275/S355/S460/S500 and shall not be applied to E295/E335/E360. ; Reference for hot-rolled structural steel materials; cold-heading process and supply applicability shall be verified separately; Not automatically added to product center.

A match in the materials database does not establish suitability for cold heading or guarantee finished-product strength. Confirmation must consider wire condition, deformation, heat treatment and tests on actual parts.