ALLOY 6B
1 source records. Standards, editions and conditions are presented separately; matching grade names do not establish interchangeability.
Refer to each source for mass fractions and analysis type. Missing values are not treated as 0. Manufacturer typical values, standard guarantees and measured heat results must remain separate. Use the material selector for calculations and condition selection.
Open condition selection, comparison and carbon-equivalent tools for ALLOY 6B →Alloy 6B · No corresponding standard is provided
Original-source verification is incomplete; this is not a formal standard reference
- Material category
- Stainless steel
- Subcategory
- Special alloy steel
- Material form
- Reference record
- Composition basis
- Manufacturer-published composition range
- Verification status
- Reference data; original source not verified
- Document title
- Stellite6B official web data; accessed2026-10-13
- Table / clause
- Chemical Composition — Stellite6B row; *maximum
- PDF page references
- Manufacturer
- Kennametal Stellite
Carbon-equivalent reference
Composition
| Element | Composition requirement |
|---|---|
| Co | Cobalt base (no numerical value stated) |
| Cr | 28 ～ 32 |
| W | 3.5 ～ 5.5 |
| C | 0.9 ～ 1.4 |
| Ni | ≤ 3 (lower limit not stated) |
| Si | ≤ 2 (lower limit not stated) |
| Fe | ≤ 3 (lower limit not stated) |
| Mn | Listed as another element; no numerical value stated |
| Mo | Listed as another element; no numerical value stated |
Applicability and limitations
The archived webpage explicitly calls Alloy6B Stellite6B. This record has been checked against the manufacturer’s official 6B row; do not apply the adjacent Stellite6 row to it.. Asterisks for Ni/Si/Fe represent maximum values of 3/2/3% respectively.; Co is labeled Base; Mn/Mo are listed as other elements with no numerical values.; Other values in the old reference library have no basis in this table; original values are retained in the repair evidence.. The page references AMS5894 but without a specific version; it cannot be claimed that the original text of the standard has been verified..