1141 CLASS A
1 source records. Standards, editions and conditions are presented separately; matching grade names do not establish interchangeability.
Refer to each source for mass fractions and analysis type. Missing values are not treated as 0. Manufacturer typical values, standard guarantees and measured heat results must remain separate. Use the material selector for calculations and condition selection.
Open condition selection, comparison and carbon-equivalent tools for 1141 CLASS A →1141 Class A · ASTM A311/A311M-2004
Chemical composition source verified; this does not verify every standard clause, actual supply or measured heat results
- Material category
- Carbon steel
- Subcategory
- Carbon steel
- Material form
- Reference record
- Original record status
- Original standard verified
- Standard edition
- ASTM A311/A311M-2004
- Table / clause
- Table 1, footnote A; clauses 4.1, 7.1
- PDF page references
- 1、2
Carbon-equivalent reference
Composition
| Element | Composition requirement |
|---|---|
| C | 0.37 ～ 0.45 |
| Mn | 1.35 ～ 1.65 |
| P | ≤ 0.04 (lower limit not stated) |
| S | 0.08 ～ 0.13 |
Applicability and limitations
Heat-analysis mass fractions wt%, based on edition 2004, Table 1; Unspecified elements are not entered as zero. Class A is stress-relieved after ordinary-reduction cold drawing; Class B is stress-relieved after greater-reduction cold drawing; Classification does not change the chemical composition in Table 1; mechanical requirements must be checked separately by size and category in Table 2. Table 1, footnote A: 0.15–0.35% is specified only when addition of Pb is required by the order; L is inserted between the second and third characters of the grade designation; Ordinary grades do not automatically include Pb. This standard covers stress-relieved cold-drawn bars; it does not establish cold-heading suitability or an additional supplied product.